|
|
|
|
No-Tape Silicone Bonding Adhesive - 1 oz tube
No-Tape is a medical grade adhesive and is safe for use on the skin. This silicone bonding adhesive can be used over existing tape or applied to the tape tab material on the hairpiece. No-Tape can be applied directly to the scalp for partial, perimeter or full-head bonding. It will not release from the effects of water, heat or perspiration.
You will use less, have less waste, and get a superior bond from just a small amount of No-Tape.
SKIN TEST INFORMATION: A skin test must be performed 24 hours prior to any adhesive application, as some people may develop an allergic reaction either initially or after continuous use. No warranty, expressed or implied, is made to any user. Instructions for safe use must, without exception, be followed: - All
applications must be done in a highly-ventilated area
- Cleanse
a small area inside of the forearm with a mild shampoo, rinse off. Let dry
completely.
- Apply
a small amount of adhesive directly to skin and cover with toupee tape.
Allow time to dry before coming in contact with clothing. Leave unwashed for 24 hours.
- After 24 hours, make a
visual inspection of the area to be certain that no redness, irritation,
burning, itching, swelling, or other abnormal reactions have occurred in or around
the skin test area. Discontinue use of that adhesive if a negative reaction
occurs, and proceed to skin test another adhesive until you find one
that is compatible.
- Adhesive should not
be used when the scalp or adjacent area shows evidence of any redness,
abrasion, disease, or abnormal condition.
- If any irritation or
abnormal reaction is found after continued use of any adhesive, it is
recommended that you discontinue use of that particular adhesive until
further skin tests are completed.
|
|
|
|
|
|
|
|
|
|
|
|
|
Specifications
DIRECTIONS:
- Make sure both surfaces to be joined are clean and free of all oils
- Apply No-Tape to both surfaces and spread evenly over areas to be attached.
- Allow the No-Tape to dry completely. Drying time will vary depending on the quantity and thickness applied. The adhesive will not stick properly unless dry.
- When the adhesive is dry to the touch, carefully position the unit in place and firmly press the surfaces of adhesive together.
- Avoid the use of conditioners as they contain oils that will decrease the life of the adhesive
Use adhesive remover to help release hairpiece from head.
* Do Not Use on abraded, infected, or sensitive skin *
|
|
|
|
|
|
|